chef_client_trusted_certificate Resource

This page is generated from the Chef Infra Client source code.
To suggest a change, edit the chef_client_trusted_certificate.rb file and submit a pull request to the Chef Infra Client repository.

All Infra resources page

Use the chef_client_trusted_certificate resource to add certificates to Chef Infra Client’s trusted certificate directory. This allows the Chef Infra Client to communicate with internal encrypted resources without errors.

New in Chef Infra Client 16.5.

Syntax

The full syntax for all of the properties that are available to the chef_client_trusted_certificate resource is:

chef_client_trusted_certificate 'name' do
  cert_name        String # default value: 'name' unless specified
  certificate      String
  action           Symbol # defaults to :add if not specified
end

where:

chef_client_trusted_certificate is the resource.
name is the name given to the resource block.
action identifies which steps Chef Infra Client will take to bring the node into the desired state.
cert_name and certificate are the properties available to this resource.

Actions

The chef_client_trusted_certificate resource has the following actions:

:add: Add a trusted certificate to Chef Infra Client’s trusted certificate directory (default)
:nothing: This resource block does not act unless notified by another resource to take action. Once notified, this resource block either runs immediately or is queued up to run at the end of a Chef Infra Client run.
:remove: Remove a trusted certificate from Chef Infra Client’s trusted certificate directory

Properties

The chef_client_trusted_certificate resource has the following properties:

cert_name

Ruby Type: String | Default Value: The resource block's name

The name to use for the certificate file on disk. If not provided the name of the resource block will be used instead.

certificate

Ruby Type: String | REQUIRED

The text of the certificate file including the BEGIN/END comment lines.

Common Resource Functionality

Chef resources include common properties, notifications, and resource guards.

Common Properties

The following properties are common to every resource:

compile_time

Ruby Type: true, false | Default Value: false

Control the phase during which the resource is run on the node. Set to true to run while the resource collection is being built (the compile phase). Set to false to run while Chef Infra Client is configuring the node (the converge phase).

ignore_failure

Ruby Type: true, false, :quiet | Default Value: false

Continue running a recipe if a resource fails for any reason. :quiet will not display the full stack trace and the recipe will continue to run if a resource fails.

retries

Ruby Type: Integer | Default Value: 0

The number of attempts to catch exceptions and retry the resource.

retry_delay

Ruby Type: Integer | Default Value: 2

The delay in seconds between retry attempts.

sensitive

Ruby Type: true, false | Default Value: false

Ensure that sensitive resource data is not logged by Chef Infra Client.

Notifications

notifies

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may notify another resource to take action when its state changes. Specify a 'resource[name]', the :action that resource should take, and then the :timer for that action. A resource may notify more than one resource; use a notifies statement for each resource to be notified.

If the referenced resource does not exist, an error is raised. In contrast, subscribes will not fail if the source resource is not found.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before: Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.
:delayed: Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.
:immediate, :immediately: Specifies that a notification should be run immediately, for each resource notified.

The syntax for notifies is:

notifies :action, 'resource[name]', :timer

subscribes: Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may listen to another resource, and then take action if the state of the resource being listened to changes. Specify a 'resource[name]', the :action to be taken, and then the :timer for that action.

Note that subscribes does not apply the specified action to the resource that it listens to - for example:

file '/etc/nginx/ssl/example.crt' do
  mode '0600'
  owner 'root'
end

service 'nginx' do
  subscribes :reload, 'file[/etc/nginx/ssl/example.crt]', :immediately
end

In this case the subscribes property reloads the nginx service whenever its certificate file, located under /etc/nginx/ssl/example.crt, is updated. subscribes does not make any changes to the certificate file itself, it merely listens for a change to the file, and executes the :reload action for its resource (in this example nginx) when a change is detected.

If the other resource does not exist, the subscription will not raise an error. Contrast this with the stricter semantics of notifies, which will raise an error if the other resource does not exist.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before: Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.
:delayed: Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.
:immediate, :immediately: Specifies that a notification should be run immediately, for each resource notified.

The syntax for subscribes is:

subscribes :action, 'resource[name]', :timer

Guards

A guard property can be used to evaluate the state of a node during the execution phase of a Chef Infra Client run. Based on the results of this evaluation, a guard property is then used to tell Chef Infra Client if it should continue executing a resource. A guard property accepts either a string value or a Ruby block value:

A string is executed as a shell command. If the command returns 0, the guard is applied. If the command returns any other value, then the guard property is not applied. String guards in a powershell_script run Windows PowerShell commands and may return true in addition to 0.
A block is executed as Ruby code that must return either true or false. If the block returns true, the guard property is applied. If the block returns false, the guard property is not applied.

A guard property is useful for ensuring that a resource is idempotent by allowing that resource to test for the desired state as it is being executed, and then if the desired state is present, for Chef Infra Client to do nothing.

Properties

The following properties can be used to define a guard that is evaluated during the execution phase of a Chef Infra Client run:

not_if: Prevent a resource from executing when the condition returns true.
only_if: Allow a resource to execute only if the condition returns true.

Examples

The following examples demonstrate various approaches for using the chef_client_trusted_certificate resource in recipes:

Trust a self signed certificate:

chef_client_trusted_certificate 'self-signed.badssl.com' do
  certificate <<~CERT
  -----BEGIN CERTIFICATE-----
  MIIDeTCCAmGgAwIBAgIJAPziuikCTox4MA0GCSqGSIb3DQEBCwUAMGIxCzAJBgNV
  BAYTAlVTMRMwEQYDVQQIDApDYWxpZm9ybmlhMRYwFAYDVQQHDA1TYW4gRnJhbmNp
  c2NvMQ8wDQYDVQQKDAZCYWRTU0wxFTATBgNVBAMMDCouYmFkc3NsLmNvbTAeFw0x
  OTEwMDkyMzQxNTJaFw0yMTEwMDgyMzQxNTJaMGIxCzAJBgNVBAYTAlVTMRMwEQYD
  VQQIDApDYWxpZm9ybmlhMRYwFAYDVQQHDA1TYW4gRnJhbmNpc2NvMQ8wDQYDVQQK
  DAZCYWRTU0wxFTATBgNVBAMMDCouYmFkc3NsLmNvbTCCASIwDQYJKoZIhvcNAQEB
  BQADggEPADCCAQoCggEBAMIE7PiM7gTCs9hQ1XBYzJMY61yoaEmwIrX5lZ6xKyx2
  PmzAS2BMTOqytMAPgLaw+XLJhgL5XEFdEyt/ccRLvOmULlA3pmccYYz2QULFRtMW
  hyefdOsKnRFSJiFzbIRMeVXk0WvoBj1IFVKtsyjbqv9u/2CVSndrOfEk0TG23U3A
  xPxTuW1CrbV8/q71FdIzSOciccfCFHpsKOo3St/qbLVytH5aohbcabFXRNsKEqve
  ww9HdFxBIuGa+RuT5q0iBikusbpJHAwnnqP7i/dAcgCskgjZjFeEU4EFy+b+a1SY
  QCeFxxC7c3DvaRhBB0VVfPlkPz0sw6l865MaTIbRyoUCAwEAAaMyMDAwCQYDVR0T
  BAIwADAjBgNVHREEHDAaggwqLmJhZHNzbC5jb22CCmJhZHNzbC5jb20wDQYJKoZI
  hvcNAQELBQADggEBAGlwCdbPxflZfYOaukZGCaxYK6gpincX4Lla4Ui2WdeQxE95
  w7fChXvP3YkE3UYUE7mupZ0eg4ZILr/A0e7JQDsgIu/SRTUE0domCKgPZ8v99k3A
  vka4LpLK51jHJJK7EFgo3ca2nldd97GM0MU41xHFk8qaK1tWJkfrrfcGwDJ4GQPI
  iLlm6i0yHq1Qg1RypAXJy5dTlRXlCLd8ufWhhiwW0W75Va5AEnJuqpQrKwl3KQVe
  wGj67WWRgLfSr+4QG1mNvCZb2CkjZWmxkGPuoP40/y7Yu5OFqxP5tAjj4YixCYTW
  EVA0pmzIzgBg+JIe3PdRy27T0asgQW/F4TY61Yk=
  -----END CERTIFICATE-----
  CERT
end